Table 5-1. Numbering Plan Options - Full Explanation
Bạn đang xem bản rút gọn của tài liệu. Xem và tải ngay bản đầy đủ của tài liệu tại đây (3.09 MB, 661 trang )
Chapter 5: Numbering Plan
General Numbering Plan
PI 9.xx
General Numbering Plan - Route NPL,0 (or 0,0,5,0)
Table 5-1. Numbering Plan Options - Full Explanation
Fun cti on
Promp ts & Captio ns
In stru cti ons
FROM NEW DIAL#:
Enter the first new dial number of the range that is
to be added.
TO NEW DIAL#:
Enter the last new dial number to be added. If only
a single number is required, enter the same number
as FROM NEW DIAL #.
NUMS ALREADY DEF?
(Y/N):
Enter Y to assign an additional dial number to a
port, feature or group, which already has an
assigned (old) dial number. Yes also allows
assigning additional dial numbers.
FROM OLD DIAL#:
2 - ADD
Appears when Yes is selected. Enter the old dial
number.
Enter No to assign the first dial number to a port,
feature or group which currently has no assigned
dial number.
If No is selected then the following chain of events
occurs:
The table of currently available Numbering Plan
types (items) appears.
CHOOSE TYPE:
3 - REMOVE
Enter the number of the port, feature or group to
which dial numbers are assigned.
When a port type is selected, the following
message appears:
- ENTER (SHELF,SLOT,CKT)
Enter the physical location of the first new dial
number.
When any other type is selected the following
message appears:
- ENTER INDEX #
Enter the index of the first new dial number.
FROM OLD DIAL#:
Enter first existing dial number of the range that
requires removal.
TO OLD DIAL#:
Enter last existing dial number that requires
removal. If only a single number is required, enter
the same number as FROM OLD DIAL #. After the
number is typed and [CR] pressed, if the number
was successfully removed the following message
appears:
NUMBERS REMOVED
The requested dial numbers are immediately
removed from the numbering plan.
5-5
Chapter 5: Numbering Plan
General Numbering Plan
PI 9.xx
General Numbering Plan - Route NPL,0 (or 0,0,5,0)
Table 5-1. Numbering Plan Options - Full Explanation
Fun cti on
Promp ts & Captio ns
In stru cti ons
Option 4 is not used in the General Numbering Plan.
When SHOW is selected, the table of currently
available Numbering Plan types (items) appears.
5 - SHOW
CHOOSE TYPE:
Enter the type (item) number of the port, feature or
group to which dial numbers are assigned. Once
this type number is selected an informative table
showing the dial numbers, type and location of the
requested item will appear.
Enter [CR] to display a list of all items, as in the
Display option.
Option 6 is not used in the General Numbering Plan.
7 - ERASE
When ERASE is selected the following message
appears:
** WARNING ** : all dial numbers will be lost !
ARE YOU SURE (Y/N)? N
Use this option cautiously!
Entering Yes immediately and permanently removes
all currently defined numbers from the Numbering
Plan.
The default is No.
Press [CR] to return to the main General
Numbering Plan menu.
5-6
Chapter 5: Numbering Plan
General Numbering Plan
PI 9.xx
General Numbering Plan (Alphabetical Order)
Use the following table to locate features by name.
Table 5-2. Feature Default Name List
F eatu re
F iel d
In dex/ CKT
Defaul t Di al No.
ACCOUNT CODE
9
109
#1990
ACTIVATION CODE
10
3
#*1, #11 (Eu1,2: *0,#*1)
ALARM
9
148
#1997
AUTO ANSWER ON/OFF
9
18
#138
AUTOGUARD TRUNK
9
154
#1998
AUTO REDIAL (ACNR)
9
88
#178
AUTO REDIAL - ASSIGN PRIORITY
10
0
#*8
AUTO REDIAL - CANCEL PRIORITY
10
1
#*9
AUTO REDIAL - RESTART NUMBER
10
9
#*7
AUTO REDIAL - STOP NUMBER
10
8
#*6
BELL/UNA RELAY
11
8: RMI/ASU
24: Coral SL
7050→7059
BLOCK STATION
9
63
#153
BOSS/SECRETARY GROUP NUMBERS
6
0→
see page 5-15
BOSS/SECRETARY LINE KEY
9
6
#126
BREAK-IN
special
BREAK-IN KEY
9
4
#124
BUSY OUT TRUNK
9
65
#155
CALL CHARGE PRINT
9
162
#1972
CALL CHARGE RESET WITH PRINTOUT
9
168
#1978
CALL ELAPSED TIME DISPLAY KEY
9
9
#129
CALL FWD TIMED (Station)
9
175
#1985 (Eu1: #84)
CALL FWD TIMED (Attendant)
9
174
#1984
CALL FWD ALL (Attendant)
9
78
#168
CALL FWD ALL (Station)
9
51
#141, #8 (Eu1: 140, #80)
CALL FWD BUSY (Attendant)
9
77
#167
CALL FWD BUSY (Station)
9
50
#140 (Eu1: #81)
CALL FWD BUSY/NO ANS (Station)
9
57
#147, #2 (Eu1: #2, #83)
CALL FWD NO ANSWER (Station)
9
52
#142 (Eu1: #142, #82)
5-7
3
Chapter 5: Numbering Plan
General Numbering Plan
PI 9.xx
General Numbering Plan (Alphabetical Order)
Table 5-2. Feature Default Name List
F eatu re
F iel d
In dex/ CKT
Defaul t Di al No.
CALL FWD NO ANSWER (Attendant)
9
79
#169
CALLING ID CONTROL
9
193
#1444
CAMP ON - ONHOOK
9
86
#176
CAMP ON - ONHOOK
special
5
CAMP ON - OFFHOOK
special
8
CANCELLATION CODE
10
2
#*0,#10 (Eu1,2: #*0, *0)
CHECK IN/OUT
10
157
#1970
CO BLOCKED DISPLAY
9
67
#157
CONFERENCE LOCK KEY
9
190
#1441
CONFERENCE PORTS
30
CONFERENCE RELEASE
9
173
#1983
COS SWITCHOVER
9
59
#149
DATA GROUPS
23
0→
see page 5-32
DATA PORTS
16
DATA USER
22
0→
see page 5-32
DAY/NIGHT TRANSFER (Auto/Manual)
9
144
#1993
DC NO CALL
9
179
#1989
DIAL CALL PICKUP: DIRECTED
9
90
#180, 77 (Eu2: 180, 97)
DIAL CALL PICKUP: GROUP
9
91
#181,(Eu1-6:#1), 76
(Eu2: 181, #1, 96)
DIAL SERVICE
36
0→
4850→
DID TEST NUMBER
9
186
Eu2: 160, 1660; CC1: 3999
DID TRUNKS
14
DIRECT IN LINE: DAY SERVICE
9
74
#164
DIRECT IN LINE: NIGHT 1
9
73
#163
DIRECT IN LINE: NIGHT 2
9
75
#165
DIVERT CALL KEY
9
194
#1445
DO NOT DISTURB/UNATTENDED
9
55
#145
DON’T DISTURB for Station by Attendant
9
155
#1999
DROP NO DIAL TRUNK
9
72
#162
{V8.5x}
{V8.3x}
{V8.5x}
5-8
7098→7099
see page 5-31
see page 5-31
